GPT-5.6 was already running in Codex for some users before OpenAI’s government-approved preview opened to partners. A ...

I'm going to tell you how to extract the firmware from an unprotected device. This article is also available on my blog with slightly better formatting. For this tutorial I will be using a discovery ...

Here are the Setup instructions for raspberry pi pico development using a pico-probe on WSL2 and VSCode. This repo contains a working and properly configured VScode example that flashes an LED and ...

This article is part of my hands-on journey experimenting with Rust for embedded system development. Feedback, questions, and suggestions are welcome! Welcome! In this chapter, you'll set up ...

When we first wrote about the 10-cent CH32V003 RISC-V MCU it was offered in a $7 development board and the closed-source MounRiver Studio IDE had to be used for programming. But things have improved ...

The following was tested on an Ubuntu Linux (14.10) box, so your mileage may vary if you are using some other platform. I used a clone "ST-Link V2" device and OpenOCD, the genuine ST-Link adapters ...